Wang Xin the 450 underground metal detectors using high-power transmission, automatic tracking system, it has the detecting depth sufficient and accurate recognition ability, is a professional super depth detector, especially exploration work in the deep strata.
[features]
Easy to carry, simple operation. This instrument has two different detection modes, the recognition model can distinguish the non-ferrous metal (gold, silver, copper, lead, tin) and black metal (iron). Can also be used for placer gold exploration, to determine the content according to the size of the voice.
Detection of buried metal, influenced by geological structure. Formation contains a wide range of minerals will make the metal detector generates a signal, the signal of some minerals will hide the metal caused false image. Used of old metal detector people have such experience, with the probe ground surfaces, the signal will change, probe near the mound, stones, bricks and mortar will send out alarm sound, this phenomenon is called "mineralization reaction". For this reason, the old metal detector can only detect metal in the shallow soil, is incapable of action of buried deep under the ground metal target. Xintai King 450 instrument equipped with advanced balance system, it only gated metal signal, eliminate interference "mineralization reaction", greatly improve the detection depth of the instrument.
【
[host] appearance and button
[guide]
Open the packing box, there are 5 components: the host box, detection, 3 combined telescopic rod disc. Assembly of the detector is very simple, do not need special tools, just follow the steps below:
A, out of three telescopic rods together.
Two, remove the probe disc, the detection plate and the combined telescopic rod connecting bolt.
Three, vertical stretching or shortening the pole to the appropriate length, and then relax the arm holding the probe, probe and the ground distance of about 1-2 inch. Adjust the probe and ground to a position parallel to the knob elastic probe.
Four, the detection plate cable inserted in the interface box. Note: please test plug position, heard sing sound, swivel it in. Do not force so as to avoid damage.
[Methods] charge
1. 將充電器接頭插入主機充電插孔。
1 the charger connector into the host charging jack.
2. 將充電器插上電源，這時充電器顯示燈為紅色，表示主機充電中。當 顯示燈轉為綠色，表明充電已經完成。這個過程一般需要大於6小時。注意：充電期 間，充電器出現變熱的現象是正常情況。
2 of the charger plug, the charger indicator light is red, said host charging. When the lights turn green, indicating that the charge has been completed. This process usually takes more than 6 hours. Note: during charging, the charger become hot phenomenon is normal.
3. 充電時一定要置於+5℃~+40℃的通風處，並且一定使用廠商提供的充電器。使用未經認可的充電器可能會引起危險，並將違反對本儀器的認可和保修條例。
Must be ventilated place at +5 ℃ ~+40 ℃ 3 charging, and must use vendor supplied charger. Use may cause dangerous unauthorized charger, and the violation of the acceptance and warranty regulations.
4. 建議儀器第一次充電時在沖滿轉綠燈後繼續充2小時再斷開電源。
4 suggestions of instruments and the first charge to charge for 2 hours and then disconnect the power supply in full after the light turns green.
5. 當用戶使用儀器時發現對金屬的報警聲音小，請注意這是“電量過低”。請及時充電後再使用。若電池電量沒有用完，主機會自動減少充電時間。
5 when the user when using the instrument found on metal alarm sounds small, please note that this is "the power is too low". Please charge immediately before use. If the battery is not used, the host will automatically reduce the charging time.
6. 充電結束後，請您將充電器與主機和電源斷開。
6 after charging, please put the charger and the host and the power is disconnected.
【開機/關機】
[on / off]
1. 開機前應檢查探盤纜線是否正確插入主機，插頭螺 帽是否擰緊。
1 boot should be checked before the disk cable correctly inserted into the host, the plug screw cap is tightened.
2. 檢查各連接線、連接杆是否牢固，探盤是否調好合適的探測角度。
2 check the connecting line, connecting rod is strong, the disc is adjusted the appropriate detection angle.
3. 開機----按照本說明書後面的具體操作步驟操作。
3 boot - according to the operation steps of the specification.
4. 關機----確定關閉主機電源後才能拔掉纜線，拆分各連機部分。
4 shutdown - OK to close the host power supply to unplug the cable splitting machine part, respectively.
[that] the operation of key equipment
一、記憶按鈕 MEMO
One, the memory button MEMO
在面板左下方的紅色按鈕，叫做記憶按鈕。把它按一下就能啟動 機內的記憶電路記住儀器的工作環境。譬如探頭在泥土上方，泥土對儀器產生一定的信號，按一下按鈕之後，泥土的信號就沒有了，在金屬物體的周圍是不能按下按鈕的，因為按了之後儀器記憶了金屬的信號，再遇到金屬就探不著了。如果按住按鈕不放，儀器就老是處在記憶的狀態，對什麼信號都不會有反應。
In panel bottom left of the red button, the button is called memory. The press can start memory circuit built-in remember instrument working environment. For example, the probe in the soil above the earth, have a certain signal on the instrument, click the button, the mud signal is not, in the surrounding metal objects is not to press the button, as after the instrument memory metal signal, to meet a metal probe not. If you hold down the button is not put, the instrument is always at the state of memory, not on what signal response.
在調節儀器的任何一個旋鈕之前，都應先按下記憶按鈕，調好之 後，放鬆按鈕，儀器工作時，隨著環境的變化電錶的指標會偏離零點，按、放一次按鈕，指標就回零了，在整個探測過程中按鈕老是被按個不停。
Before any a knob to adjust the instrument, should first press the memory button, button up after, relax, instrument, along with the change of index meter environment will deviate from zero, press, put a button, indicator to zero, the button is always kept in the whole detection by in the process of.
二、調諧器旋鈕 TUNER
Two, TUNER tuner knob
探測時應正確使用調諧器。把調諧器旋鈕由左邊順時針旋轉，儀器的聲音從無到有，從小到大。當聲音剛剛開始出現，勉強可以聽到時，就是我們所需的聲音“臨界聲”。只有調出這種微弱的“臨界聲”，儀器才具有最高的靈敏度，聲音太大或根本沒有聲音都會降低探測效果。在調“臨界聲”時，一定要按下按鈕，調好之後，鬆開按鈕。在儀器的使用過程中如果“臨界聲”逐漸增大或減小甚至消失，就按一下按鈕使它恢復。
Exploration should be the proper use of tuner. The tuner knob clockwise from left, instrument sounds from scratch, from small to large. When sound is beginning to emerge, can barely hear, is our desired sound "critical sound". Only out of the weak "critical sound", the instrument has the highest sensitivity, too loud or no sound will reduce the detection effect. In the "critical sound", must press the button, after adjustment, release the button. In the use of process equipment if the "critical sound" gradually increase or decrease or even disappear, then click the button to restore it.
三、靈敏度旋鈕 SENSI
Three, the sensitivity knob SENSI
靈敏度旋鈕可以控制儀器的靈敏度。把旋鈕反時針方向擰到盡頭，儀器的靈敏度會降到最低，探測深度也很小；若把旋鈕往順時針方向旋轉，靈敏度就會逐漸提高，擰到最右邊時，靈敏度最高，探測深度也最大。
Sensitivity knob can control instrument. The knob counter clockwise twist to the end, the sensitivity of the instrument will be reduced to the minimum, the exploration depth is very small; if the knob clockwise rotation, the sensitivity will gradually improve, twist to the right, the highest sensitivity, detecting depth and maximum.
我們在使用儀器時總是希望探得深一些，但千萬不能忽略“礦化反應”的影響。在“礦化反應”大的地段，提高了靈敏度之後會引起假信號，儀器到處亂響，反而探不到東西。遇到這種情況時，應當把靈敏度適當降低，以減少複雜的地層對儀器的影響。在土質均勻而又沒有雜物的地方，可以調到最高的靈敏度，此時儀器達到最大的探測深度。
We always want to probe deeper in the use of instruments, but don't ignore the effect of "mineralization reaction". "Mineralization reaction in lots of" big, then improve the sensitivity will cause a false signal, instrument is everywhere disorderly ring, instead of nothing. Encounter this kind of situation, should be appropriate to reduce the impact sensitivity is reduced, complex formation on the instrument. No sundries places in the uniform soil quality and sensitivity, can be transferred to the highest, reaching maximum detection depth of the instrument.
每調一次靈敏度旋鈕時都要按住按鈕，調好之後才鬆開按鈕。
Each a sensitivity knob must press the button, then release the button to adjust the.
四、地平衡旋鈕 GROBAL
Four, to balance the knob GROBAL
由於“礦化反應”的原因，舊式金屬探測器的探頭接近地面時會產生信號，在探頭沿著地面搜索的過程中，探頭與地面距離的變化引起“臨界聲”忽大忽小地變化，使人分不清到底是金屬的信號還是“礦化反應”的信號。為了解決這個問題，本儀器設計了地平衡線路，把“礦化反應”的影響降到最低。
The "mineralization reaction", probe the old metal detector is close to the ground will be generated when the signal process, search in the probe along the ground, the distance change with the ground probe caused the "critical sound" flickering signal change, make people cannot distinguish clearly is the metal signal or "mineralization reaction". In order to solve this problem, this instrument is designed to balance line, the effect of "mineralization reaction" to a minimum.
地平衡的探測方式首先要把操作方式開關放在地平衡檔，然後調節地平衡旋鈕。
Detection methods to balance the operation mode switch on the balance gear, and then adjust the balance of the knob.
把地平衡旋鈕擰到10的刻度，使探頭抬離地面調出“臨界聲”之後在降到地面上，儀器的聲音就會增大；如果擰到0刻度再按上述的刻度，上述的過程做一次，儀器的聲音便減小了。說明了地平衡旋鈕在全刻度範圍內一端使聲音增大，另一端使聲音減小，那麼它在中間必然存在這樣一個刻度，旋鈕對準這個刻度之後由地面引起的聲音既不增大也不減小，它就是我們所要調到的地平衡點。
To balance the knob to the 10 of the scale, the probe lift off the ground out of the "critical sound" after falling to the ground, the sound of the instrument will increase; if the screw into the 0 scale according to the scale, the process time, the sound of the instrument is reduced. The balance of the knob in the full scale range so that the voice on the other end is increased, the sound is reduced, then it must exist in the middle of such a scale knob on the scale, after the ground caused by sound neither increase nor reduce the balance point, which is what we want to.
The specific practices are as follows:
● 操作方式開關撥到地平衡檔；
● operating mode switch to a more balanced;
● 把探頭抬離地面約60公分左右，調出“臨界聲”；
To probe lift off the ground about 60 centimeters, call up the "critical sound";
● 把探頭降落到離地面20公分左右，如果聲音變大了，就抬起探頭（60公分左右）把地平衡旋鈕朝反時針方向擰轉一點靠近地面試一試，如果聲音仍然增大，又再往反時針方向轉一點，直到抬起和放下探頭聲音不變為止。如果按上述的過程實驗聲音是減小的，則需把地平衡旋鈕朝順時針方向調整直到聲音不變為止；
To probe down to 20 cm from the ground, if the sound becomes larger, raise the probe (60 cm) to balance knob counter clockwise turn toward a point closer to interview a try, if the sound is still increasing, and then turn anti clockwise until a point, lift up and put down the probe sound the same. If the process of experimental sound above is reduced, it would take to balance knob towards clockwise until the sound the same;
● 如果在某一地點調試時不管怎樣調整聲音都是增大的， 說明該處埋有金屬，應該換一個地方調試；
● if how in a certain place when debugging to adjust sound no matter is increased, indicating that the premises are embedded with metal, should change a place debugging;
● 每次提起探頭擰轉地平衡旋鈕時，都應該先按下按鈕，擰好之後 鬆開按鈕在向地面降落。
● every mention of probe twist balance knob, should be the first to press the button, then release the button is screwed to the ground.
按照上面的方法調好地平衡之後，儀器基本上消除了“礦化反應”的信號，探頭在地面上隨意移動也不會引起聲音變化，只有在遇到金屬時才發出聲響。
Then mix in accordance with the above method, the instrument basically eliminated the "mineralization reaction of the probe signal", on the ground move does not cause the sound change, only in the face of metal sound.
五、識別旋鈕 RECOG
Five, identify the knob RECOG
識別旋鈕是在識別工作方式使用的，因此在調節這個旋鈕之前應 先把工作方式開關撥到識別檔。在識別旋鈕的周圍刻有0-10的刻度，把旋鈕對準不同的刻度可以選擇不同的信號，利用這個特點我們能夠區分有色金屬和黑色金屬。
Identify the knob is used in identification mode, so before adjusting the knob should put the work mode switch to the identification of document. 0-10 scales are carved around the recognition of the knob, knob at different scales can choose different signal, using this feature we can distinguish the non-ferrous metal and ferrous metal.
識別旋鈕能夠在同類金屬中排除黑色金屬而選擇有色金屬。所有有色金屬都能發出聲音，而黑色金屬因沒有信號而被排除掉。
Identification and selection of nonferrous metal knob can eliminate black metal in the same metal. All ferrous metals could make a sound, and black metal because there is no signal and ruled out.
注意：每調整一次識別旋鈕之前要按下按鈕，調好之後在鬆開按鈕。
Note: each adjustment before a recognition knob to press the button, the button is released after adjustment.
六、操作方式開關
Switch six, operation mode
操作方法開關有兩個檔位元，一個檔位是地平衡，另一檔位是識別。
Switch operation method has two stalls bits, a gear is balance, the other step is recognition.
在地平衡檔，儀器對所有的金屬都發出響聲，沒有識別的作用，但是能夠排除地層中“礦化反應”的影響。在儀器調好地平衡之後，它具有足夠的穿透力，工作穩定，指示準確，因此一般開始對某一地段探測時都採用這個方式。
In the balance gear, the instruments are the sound of all the metal, no recognition of the role, but to exclude formation "mineralization reaction" effect. In the instrument adjusted to balance, it has enough penetration, stable operation, accurate indication, so the general began to use this way of detection of a lot.
識別方式是配合地平衡方式使用的。用地平衡方式探明存在金屬之後，再用識別檔去區分金屬的種類。或者在那些有大量廢金屬的地方選擇大件的有價值的金屬。
Identification method is used with the balance. After the land use balance mode proved the existence of metal, species and identification of document to distinguish between metal. And in places where there are large quantities of waste metal choice pieces of valuable metal.
Seven, the routine setting switch
主機盒的左上方安裝有一個常規設定開關。在一般的情況下，開關撥到常規一邊，儀器處在常規工作狀態，常規檔具有足夠的靈敏度和最大的探測深度。如果把開關撥到設定一邊，儀器處於設定工作狀態，在設定工作狀態下，儀器靈敏度會有所降低。而且只有當探頭在金屬目標上移動時才有信號發生，如果探頭停在金屬上方不動，信號便消失了。因此使用設定檔探測時，應使探頭在地面上來回移動，遇到金屬時，喇叭就會發出短促有力的聲音。
A conventional setting switch installed above the left the host box. In the general case, switch to the normal side, instrument in routine work state, the conventional gear has a depth sufficient sensitivity and maximum. If the switch to set aside, instrument in set working state, in the setting of working conditions, the sensitivity will decrease. And only when the probe moves in the metal target is only a signal, if the stop in the metal probe above does not move, the signal disappeared. Therefore the use of profile detection, should make the probe moving back and forth on the ground, encountered in the metal, the horn will send a short powerful voice.
如果地下埋有兩塊金屬，它們的距離只有一米左右，我們用常規探測時，在這一米的範圍之內都有聲音，叫人弄不清兩塊金屬的準確位置，這時可以把開關撥到設定一邊，讓探頭掃過發出信號的區域，儀器就會發出兩次短促的響聲，發聲的地方就是這兩塊金屬的具體位置。
If the underground buried two pieces of metal, their distance is about one meter, we use conventional detection, there are voices within the scope of this meter is unclear, the accurate position of two pieces of metal, then you can put the switch to set aside, let the probe signal region, instrument will be issued two short sound, the specific location of the sound of the two pieces of metal.
在實際工作中設定檔是很有用的。有些地方地下的金屬雜物較多，探測器到處是信號聲，遇到這樣的情況應該首先使用設定檔，讓探頭在整個探測區掃一遍，把淺土層中的金屬雜物挖掉，在表層乾淨的情況下再使用常規檔向縱深的部位探測。
In the actual work profile is very useful. Metal debris more underground detectors in some places, everywhere is the acoustic signal, encountered such a situation should be the first to use the profile, let the probe scan again the whole detection area, the metal impurities in shallow soil layer in the surface clean out, under the condition of using conventional detection to the deep parts of the file.
注意：設定檔的靈敏度較低，在探測埋得很深的目標時不要用設定檔。
Note: the sensitivity profile is low, not in the detection of buried very deep target profiles.
八、耳機插孔
Eight, the earphone jack
鑫探王450型儀器配有一個耳機插孔，插上耳機之後，喇叭的響聲中斷，操作人員從耳機聽到信號聲，以便於在嘈雜的環境中或夜間工作。
Wang Xin exploration type 450 instrument equipped with a headphone jack, then plug in headphones, speakers sound interrupted, the operator heard the signal sound from the headphones, for in a noisy environment or working at night.
【鑫探王450用於探測金屬】
[Wang Xin of 450 for detecting metal]
打開電源開關，儀器即通電工作。剛開機時請注意觀察電錶，一般情況下錶針不在中位元而是偏往一邊，按、放一次按鈕後錶針暫時回到中間，但又慢慢向一邊偏移，這表明儀器的工作狀態尚未穩定，不能馬上使用。你可多按幾次按鈕，過些時間之後指針就不在偏移了。上述現象是正常的，IT450型儀器開機後都有短暫的預熱時間，在這段時間應把探頭提到空中不動，待錶針回復零位之後才可以進行探測工作。
Turn on the power switch, the instrument is switched on. Just boot time please pay attention to the meter, general hands not in bits but partial to one side, according to, put a button hands briefly returned to the middle, but slowly to the side of the offset, which indicates that the operating state of the instrument is not stable, not immediately use. You can press a few buttons, after some time the pointer is not in migration. This is a normal phenomenon, IT450 type instruments have preheat time short boot, at this time should be to probe into the air motionless, hands back to zero after detection work.
鑫探王450型儀器實際探測時握著手柄讓探頭緩緩地沿著地面移動，整個探測過程中應保持探頭與地面距離為20公分左右，儘量不要使距離忽大忽小的變化。探到金屬時，儀器便發出聲音，同時電錶的指標也會有刻度指示。
Wang Xin exploration type 450 actual detection instrument holding the handle to probe slowly along the ground and mobile, should maintain the distance of probe and the ground 20 cm around the entire detection process, try not to make the distance change protean. Exploration to the metal, the instrument sound, at the same time the meter index will also have a scale indication.
注意：本儀器裝有自動跟蹤系統，當探到金屬之後，該系統會跟蹤金屬的信號使報警聲慢慢地減小消失，電錶的指標也慢慢的回零，因此探頭不要在目標的上方停留太久，為了再一次證實金屬的存在，可以把探頭移開目標區域之後，按、放一次按鈕恢復“臨界聲”再探一次。
Note: this instrument is equipped with automatic tracking system, when the probe into the metal, signal of the system will track the metal makes the alarm sound slowly diminish, the meter index also slowly back to zero, so the probe not above the target to stay too long, to once again confirmed the presence of metal, can take away the target region probe after that, according to, put a button to restore the "critical sound" on a.
人身上的金屬物品會影響探測，要求操作者把身上的手錶、戒指、金屬皮帶扣、香煙盒等金屬雜物全部除掉，並且不能穿帶釘的皮鞋，最好穿布鞋或塑膠鞋工作。
Metal items people will affect detection, requires the operator to the body of the watches, rings, metal belt buckle, cigarette box, metal debris removed, and can not wear spiked shoes, wear cloth shoes or plastic shoes.
一、地平衡方式
A balanced way,
把操作方式開關撥到地平衡檔，儀器就處在地平衡的工作方式。這種方式能排除大地的“礦化反應”，而且又具有較佳的穿透力，因此不管是室內搜尋還是野外作業通常使用這一方式。探明地下確實存在金屬之後，才用識別方式去區分金屬的種類。在地平衡工作方式中，只要探頭對準了目標，儀器便發出響聲，電錶也有刻度指示，不管是有色還是黑色金屬都會使聲音增大。
The operating mode switch to the balance gear, instrument in balance work. This method can eliminate the "mineralization reaction", but also has better penetration, so whether indoor search or field work often use this way. After the exploration of underground there is metal, used to distinguish between metal species identification. In the balance of work, as long as the probe is aligned with the objectives, instruments and sends out sound, the meter has scale indication, regardless of color or black metal will make the sound.
操作程式如下
Operation of the program are as follows
1、打開電源開關；
1, turn on the power switch;
2、把操作方式開關撥到地平衡檔；
2, the operation mode switch to a more balanced;
3、把探頭提離地面60公分左右不動，按、放幾次按鈕，讓儀器預熱片刻，直到電錶的指針回復零位之後不再偏移為止；
3, to about 60 cm above the ground does not lift probe, according to several times, put the button, let the instrument preheating moment, until the meter pointer reset after no longer offset;
4、調出“臨界聲”；
4, call up the "critical sound";
5、按前面介紹過的方法調好地平衡；
Method 5, as introduced in front of the adjusted balance;
6、探頭沿著地面搜索，注意與地面保持20公分左右的距離。
6, the probe along the ground search, pay attention to maintain a distance of about 20 cm and the ground
Two, recognition
這種操作方式能區分有色金屬和黑色金屬，也能在同一類金屬中 除小塊的而選擇較大塊的金屬。識別方式沒有地平衡的作用，因而土層的“礦化反應”很大，操作人員要謹慎使用。
This mode of operation can distinguish the non-ferrous metal and ferrous metal, also can be in the same class of metal in small and large metal. The identification mode doesn't have the effect, so the soil "mineralization reaction", the operator should be used with caution.
操作過程如下：
The operation procedure is as follows:
1、打開電源開關；
1, turn on the power switch;
2、把操作方式開關撥到識別檔；
2, the operation mode switch to the identification of document;
3、預熱；
3, preheating;
4、調出“臨界聲”；
4, call up the "critical sound";
5、區分黑色、有色金屬： 排除不需要的目標：
5, to distinguish between black, non-ferrous metals: exclude the unwanted objects:
如果探測的地點在室內或是一片廢墟，土層中有很多廢棄的金屬雜物，它們一般都沒有什麼用處，探測時可以把它們排除掉。例如在一個廢鐵釘很多的地方探測時，到處是鐵釘的信號，給探測工作帶來不便。遇到這樣的情況時，可以預先放一顆鐵釘在地上，讓探頭掃過它的上方，如果儀器的聲音增大了，就按下按鈕，把識別旋鈕向右（順時針方向）擰到一點，鬆開旋鈕再探一次，經過反復調節直到掃過鐵釘上方剛好沒有聲音變化為止。調好之後，地面埋藏的鐵釘以及比鐵釘小的黑色金屬都不會使儀器的聲音增大，而所有的有色金屬以及比鐵釘大的黑色金屬都有較大的信號聲。
If the detection place indoors or in the ruins, there are a lot of waste metal debris soil, they are generally not what's the use, detection can put them out. For example, many local detection nail in a scrap iron, is full of nails signal, detection work inconvenience. Encountered such a situation, can put a nail on the ground, let the probe above it, if the instrument sound increases, press the button, to identify the knob to the right (clockwise) is screwed to the point, loosen knob on the time, after repeated adjusted until swept the nail above just do not have the sound change so far. After adjustment, the nail surface buried and black metal is smaller than the iron nail will not make the instrument's sound increase, while all of the non-ferrous metal and ferrous metal than iron nails big are the signal sound great.
三、探測實例
Three, the detecting example
以上介紹了儀器的兩種操作方式，在實際探測時操作者要根據具體情況來選擇不同的方式，有時又需要交替地使用這兩種方式。
The above two kinds of mode of operation instrument, in the actual detection operator to choose different ways according to the specific situation, and sometimes need to alternately use this two ways.
例如在一座古老的房子裏尋找埋藏較深的遺物，由於長期以來地下掩埋著各種被丟棄的金屬雜物如鐵釘、銅絲、舊鎖、鐵鍋的碎片……等，這些東西一般埋在淺表層中，距離探頭較近，信號自然是很大的。
For example, searching for deep buried relics in an old house, the long buried all discarded metal impurities such as iron, copper, iron, fragments of the old lock...... So, these things buried in shallow, near distance probe, signal is great.
為了排除這些雜物而去探測埋藏深處的目標，應該採用什麼操作方式呢？
In order to remove these impurities and to detect buried depths of the target, should adopt what operation?
這就要看資訊的準確程度了。如果只聽到人們的傳說可能該處埋有東西，但是並不十分肯定，我們可以採用識別檔，把識別旋鈕擰到排除鐵釘那一點然後進行粗略的掃描，假若地下埋有比鐵釘大的黑色金屬或有色金屬，儀器都會發出響聲，但是這種探測方式不能排除地層的“礦化反應”，探測的結果是不夠準確的。如果所獲的資訊非常真切，甚至是由埋藏者或者目擊者帶到現場去的，那麼就必須採用地平衡操作方式了。我們首先應把屋內的金屬傢俱搬出去，略為降低靈敏度並仔細地調好地平衡。探測時，每發現有金屬就必須挖出來，經過細緻的清理工作，淺土層的金屬雜物基本上清除掉了，在土層乾淨的情況下用探頭向縱深的部位搜尋。探測工作是一項細緻而又艱苦的工作，它要求操作者有耐心、信心和毅力。任何金屬探測器都不可能將地下的金屬物體顯示的一清二楚，它只能大概地預示金屬目標的位置，要能準確地找到所需的東西，還要求操作者具有豐富的經驗，根據儀器的反應仔細地分析，以作出正確的判斷。
The degree of accuracy that depends on the information. If only heard legends may be the buried something, but not quite sure, we can use the identification of document, identifying the knob to the exclusion of the nail that point then rough scanning, if buried than nails big black metal and non-ferrous metal, the instrument will make noise, but the detection methods can not eliminating stratum "mineralization reaction", the detection result is not accurate enough. If the information is very real, even by the burial or witnesses to the scene, then there must be a balance mode of operation. We should first of all the metal furniture inside the house to move out, slightly reduced sensitivity and carefully adjusted the balance. At the time of detection, each found a metal must be dug out, after careful cleaning, metal debris in shallow soil basically cleared, clean in soil conditions with probe to the depth of the site search. Exploration work is a meticulous and hard work, it requires the operator to have patience, confidence and perseverance. Any metal detectors are impossible to be crystal clear display of underground metal object, it can only be roughly indicates metal target position, to be able to accurately find the needed things, also requires the operator to have a wealth of experience, according to the instrument response and careful analysis, to make a correct judgment.
【鑫探王450用於探礦】
[Wang Xin exploration 450] for prospecting
探測自然金塊就像尋找金屬硬幣那樣用地平衡方式進行，大多數金塊埋藏在礦化程度較高的岩層中，因此事先必須仔細地調好地平衡。
Detection of natural gold nuggets like finding a metal coin that land use balance way, most gold buried in the higher degree of mineralization in strata in advance, so must be carefully adjusted to balance.
在沙金礦中，金子以其碎細的形式跟沙土混合在一起，並且往往伴隨著重金屬礦的沉積物，這種混合物的信號與黑色金屬相同，但反應較弱，而反應的區域比較寬闊。
In the sand of gold in gold, with its broken fine form with sand mixed together, and are often accompanied by heavy metal mine, the mixture signals and black metal, but the reaction is weak, while the reaction region wide.
鑫探王450型地下金屬探測器亦可以進行礦塊的篩選工作。進行這項工作時操作者不必手提探測器而是把儀器固定在一個非金屬的支撐物上，調出“臨界聲”，然後把礦石一塊一塊地靠近探頭，根據聲音的大小來確定含量的高低。應記住，每測完一塊樣品就按放一次按鈕。這種金屬含量的測定技術對脈金礦的篩選以及對舊礦井留下的礦尾的測定是很有用的，有些採礦人常把表面看得見金子的礦石留下，其餘的就仍掉了。其實，被仍掉的礦石中有一部分仍含有金子。對於其他的金屬礦，有些信號比較大，有些則沒有反應，操作者可以用一塊標準的礦石來做實驗，看儀器對它的反應情況，從而確定此類礦石與普通岩石在信號上的區別。
Wang Xin the 450 underground metal detectors can also work screening ore block. This work was carried out when the operator does not need portable detector but the instrument fixed in a non metal supports, call up the "critical sound", and then the ore blocks near the probe, to determine the content according to the size of the voice. Remember, each measuring a sample to put a button. Determination of the content of metal screening technique for determination of gold and leave the old mine mine tail is very useful, some mining people often cut surface visible gold ore left, the rest is still off. In fact, is still out of the ore in part still contains gold. For metallic ore other, some signal is relatively large, and some have no reaction, the operator can use a standard ore to do the experiment, see the instrument responds to it, so as to determine the difference between this kind of ore and rock in the ordinary signal.
[the main reference]
發射頻率：6.99 KHz
Frequency: 6.99 KHz
信號頻率：437Hz
The signal frequency: 437Hz
毛 重：3250g
Gross weight: 3250g
電 壓：±6V
Voltage: 6V
最大探測深度：10m
The maximum detection depth: 10M
【安全預防措施】
[] safety prevention measures
1. 不可超出電源供電系統指定電壓，並請使用規定的外部設備。
1 do not exceed the specified voltage power supply system, and requests the external device using the specified.
2. 無論在任何情況下，都不可拆開儀器或充電器，並且嚴禁對設備進行修 改。儀器防拆標籤若有損壞，保修保換服務即失效。
2 in any case, do not disassemble the equipment or the charger, and it is strictly forbidden to equipment modification. Instrument tamper proof label if damaged, Baohuan warranty service failure.
3. 儀器不能在雷雨天和烈日下暴曬使用。
3 instruments in the thunderstorm days and sun exposure can not be used.
4. 儀器不能放置在火爐旁或其他高溫的環境中。
4 instruments can not be placed in the fireplace or other high-temperature environment.
5. 探頭電纜所連的插頭不能受潮，遇到這種情況要把插頭烘乾再使用否則將喪失探測能力。
5 probe cable connected plug not damp, encounter this kind of situation to plug a dryer to use that would otherwise be lost detection capability.
警 告：使用不當會導致保修失效！
Warning: improper use will void the warranty!
【特別提示】
[note]
1. 本儀器的探測深度與被探金屬的面積、形狀、數量都有很大的關係，一般來說面積越大，數量越多，埋藏時間越長，探測深度也越深；面積越小，數量越小，埋藏時間越短相應的探測深度也越淺。
1 the probing depth and the metal area, shape, quantity have great relations, generally the greater area, number, burial time more long, the exploration depth is deeper; area is small, the smaller number, the shorter the time corresponding to the detection of buried depth is more shallow.
2. 儀器做性能檢測時要考慮到剛埋藏的金屬沒有二次傳導，只能達到實際探測深度的百分之三十以內效果。
2 instruments do performance testing should be considered just buried metal no two conduction, can only meet the actual depths within thirty percent effect.
3. 儀器檢測深度，是按產品的企業標準通過O3 強氧化實測的結果。
The 3 instrument detection depth, according to the product enterprise standard by O3 strong oxidation measured results
|
